Panasonic FP2 ET-LAN Technical Manual page 157

- Setting using the ladder program
Internal relay and data register allocation required for the ladder program are as shown below.
Internal relay allocation
Classification of processing
Complete signal area
Request signal area
Data register allocation
Classification of
processing
Open processing
Data transfer
processing
Data transfer area
Device number
R0 to R1F
R40 to R5F
Device number Setting item
DT20 Open method
DT21 Source node port No.
DT22 to DT23 Destination node IP address
DT24 Destination node port No.
DT25 Destination node
MEWTOCOL station No.
DT22 to DT23 Source node route No.
Destination node
MEWTOCOL station No
Number of transferred
words
DT100 to DT102 Transfer data writing area
Device used in program example
RC: Initialization complete signal
R0: Initialization error signal
R11: Open error signal (Connection 1)
R4C: Initialization request signal
Settings used in the
program
MEWTOCOL communication
TCP/IP: Full Passive open
8000
192.168.1.2
(C0A80102H)
8000
05
1
05
3
10-15