Reading Connection Information - Panasonic FP2 ET-LAN Technical Manual

6.3 Reading Connection Information

The current statuses of the settings for the various connections can be read from the shared memory.
Settings are read from the connection information notified area (Bank 0: Address 2E0H to 35FH) using
the shared memory reading instructions F150 (READ) and P150 (PREAD).
The connection information setting area consists of eight blocks, to match the number of connections.
-
The offset address contents from the table in the next page are allocated for the various connections.
-
Program example
This program uses an ET-LAN installed in slot no. 0, as shown below, and reads the connection
information for connection 1.
6-12