Names And Functions Of Parts - Panasonic FP2 ET-LAN Technical Manual

2.1 Names and Functions of Parts

2.1.1 Names and Functions of Parts
Operating status LEDs
These display the operating status of the unit, such as connection and communication conditions, and
error statuses.
10BASE5(AUI) connector
When an Ethernet (10BASE5) is being used, this connector is used to connect the ET-LAN unit and the
transceiver, using a transceiver cable.
100BASE-TX/10BASE-T connector (RJ45)
When an Ethernet (100BASE-TX, 10BASE-T) is being used, this connector is used to connect the ET-
LAN unit and the hub, using a UTP cable.
External power supply terminal for 10BASE5 (12 V DC)
When an Ethernet (10BASE5) is being used, this terminal supplies power to the transceiver.
When an Ethernet (100BASE-TX, 10BASE-T) is being used, this terminal is not used.
Mode setting switch
These are used to select the communication interface and the test mode for the Ethernet.
2-2