E-Mail Function - Panasonic FP2 ET-LAN Technical Manual

11.5 E-mail Function

E-mail sending function
-
Error Notice E-mail:
When an error occurs in the CPU unit, a fixed message is sent to the specified destination. (The
message of the e-mail cannot be edited.)
Reference:
For detailed setting procedure, refer to Chapter 4.3 of "Control Configurator ET Operational Guide Book."
(ARCT1F341E)
For the error codes to be sent, see Chapter 10.6 "Error Codes" of the "FP2/FP2SH Hardware" manual.
(ARCT1F320E)
Note:
If an error that disables the unit from normal operation (e.g. ALARM LED of the CPU unit lights up)
occurs, e-mails cannot be sent successfully.
Report Mail:
E-mails are sent to the designated destination at the specified intervals or at the specified date.
-
Time intervals can be specified within the range of 1 to 120 min.
- E-mails can be sent to the designated destination at an appointed date that can be specified with
month, day, hour and minute. Up to 3 sending time can be specified per a Report Mail.
11-7