Writing Data To The Routing Information Setting Area - Panasonic FP2 ET-LAN Technical Manual

5.2.4 Writing Data to the Routing Information Setting Area

When communication is to be carried out between networks, the necessary data is written to the routing
information setting area of the shared memory (Bank 0: Addresses 230H to 24FH), using the shared
memory writing instructions F151 (WRT) and P151 (PWRT).
Key Point:
In order to make the routing information setting area valid, "0001H" should be set for the
-
communication function setting between networks (Bank 0: Address 202H). If "0000H" is specified, the
routing information will be invalid.
If communication is not to be carried out between networks through a router, no settings are necessary
-
for this area.
5-12