Panasonic FP2 ET-LAN Technical Manual page 59

Transparent communication buffer area allocations
The transparent communication buffer area allocations (connections 1 to 3) effective when the unit is
shipped from the factory are as shown below.
The first addresses and sizes of the send and receive buffers of connections 1 to 8 can be sent to any
desired values in the 6k words transparent communication buffer area by changing the contents of the
initialization information settings.
The shared memory addresses indicated below are in word (16-bit) units.
Key Point:
If the transparent communication function is not being used, it is not necessary to write anything to
-
these areas.
Please note that the various transparent communication buffer areas are not overlapped when
-
changing them.
5-11