Panasonic FP2 ET-LAN Technical Manual page 210

Code Name
8030H MEWTOCOL
transmission
error
8031H
8032H
8033H
8034H
8035H
8036H
8040H Forced close
error
12-10
Description
In MEWTOCOL
communication, an
attempt was made to
send data although
initialization processing
had not been completed.
An attempt was made to
send a MEWTOCOL
transmission to a partner
node which had not been
opened using
MEWTOCOL.
In MEWTOCOL
communication, a
transmission error
occurred because the
connection was closed.
An error occurred when
sending data because of
a format error in the
MEWTOCOL
communication. A packet
specified a hierarchy level
(LEVEL) or 8 or more
packets.
An error occurred when
sending data because of
a format error in the
MEWTOCOL
communication. A packet
specified a hierarchy
depth (DEPTH) or 8 or
more packets.
An error occurred when
sending data because of
a format error in the
MEWTOCOL
communication. A packet
specified a message data
size of 2,049 or more.
An error occurred when
sending data because of
a format error in the
MEWTOCOL
communication. A packet
was received that
specified a value other
than 10H, 11H, 20H or
21H as the first value.
The connection was
forcibly closed by the
partner node, or a
transmission error
occurred and the source
node forcibly closed the
connection.
Step to take Remark
Carry out
transmission
processing after
initialization and
open processing
have both been
33
completed.
Send data to a
partner node for
which a 39
connection is
already open.
Run the
MEWTOCOL
transmission
again.
24
Run the
MEWTOCOL
transmission
again.
24
Run the
MEWTOCOL
transmission
again. 35
Run the
MEWTOCOL
transmission
again.
27
Check the
transmission line
connection and
the status of the -
partner node.
The value at the
left has been set
for the
transmission
completed code
of the
MEWTOCOL
transmission
control block.