6.1 Open/Close Processing
6.1.1 What is Open Processing?
Setting the connection information used to carry out communication with a partner node and enabling
communication is called open processing.
Connectors for up to eight connections can be opened with a single ET-LAN unit. The contents noted in
the table below are set in the open information setting area of the shared memory in the unit for each
connection.
When communication has been completed, close processing can be used to release the connection.
Items set for open processing
Setting area
Open information setting
area
6-2
Application being
used
Source node port No.
Partner node IP address
Partner node port No.
Partner node MEWTOCOL station number
Partner node Ethernet address
Setting item
Communication method (TCP/IP or UDP/IP)
Open method (Active, Fullpassive or Unpassive)
Application using the connection (MEWTOCOL
communication or transparent communication)