Panasonic FP2 ET-LAN Technical Manual page 277

Connection information notified area (Bank 0)
Offset address
Offset Name
address
0 Open processing
complete code
(connections 1 to 8)
1 Source node port No.
(connections 1 to 8)
2 Partner node IP address
(L)
(connections 1 to 8)
3 Partner node IP address
(H)
(connections 1 to 8)
4 Partner node port No.
(connections 1 to 8)
5 Partner node
MEWTOCOL station No.
(connections 1 to 8)
6 to 9 Reserved (Used by the system.)
Stored value and explanation
[Stored value] 0: Open processing has been completed successfully.
Other than 0: Error code (when open processing ended in an error)
- If re-open processing is carried out, the results are overwritten.
- Error codes are also stored in the error log area.
[Stored value] Source node port numbers for various connections after
open processing has been completed.
- The value is not valid until open processing has been completed
successfully.
[Stored value] Partner node IP addresses for various connections after
open processing has been completed.
- The value is not valid until open processing has been completed
successfully.
[Stored value]Partner node IP port numbers for various connections after
open processing has been completed.
- The value is not valid until open processing has been completed
successfully.
[Stored value] Partner node MEWTOCOL station numbers for various
connections after open processing has been completed.
- The value is not valid until open processing has been completed
successfully.
15-15