Panasonic FP2 ET-LAN Technical Manual page 188

To conduct the e-mail receive processing once again, be sure to confirm that the e-mail receive error
signal is OFF.
Note:
To receive e-mails using the ladder program, the following settings are required in advance using the
-
setup tool (Configurator ET).
Log-in name
-
Password
-
POP (e-mail) server IP address
-
When all required settings are not specified, an e-mail is not received even if the e-mail receive request
signal is turned ON. The e-mail receive error signal is turned ON instead.
Users are notified of the description of the error by means of the error log.
-
Reference: Control Configurator ET "Operational Guide Book" (ARCT1F341E)
11-20