Reset Function Sample Program - Panasonic FP2 ET-LAN Technical Manual

13.3.4 Reset Function Sample Program

Program contents
The sample program is for the ET-LAN unit installed in Slot No. 0, and the reset function is executed
-
when the communication of connection 1 stops (the no communication time-out signal of connection 1
is on) longer than 60 seconds after the open of connection 1.
The request signal area in the handshake area should be cleared after the execution of the reset
-
function.
The no communication time should be reset when starting the program operation and after executing
-
the reset function.
13-10