Panasonic FP2 ET-LAN Technical Manual page 43

Ladder send e-mail setting area <Bank 10H Addresses 000H to 03FH>
Used when e-mails are sent using the ladder program.
-
Used to specify the e-mail destination address and message.
-
Auto connection status check area <Bank 10H Addresses 040H to 04FH>
Used to check whether the auto connection function is used or not.
-
Used to check the open status of each connection (1 to 8).
-
System connection information notified area <Bank 10H Addresses 050H to 07FH>
Used to check the setting status of each system connection (1 to 3).
-
E-mail status area <Bank 10H Addresses 080H to 08FH>
E-mail send/receive status is stored.
-
The contents stored here include the number of times e-mail is sent or received.
-
E-mail error log area <Bank 10H Addresses 200H to 3FFH>
Descriptions of the e-mail send and receive errors are stored when e-mail error log is requested.
-
Up to the latest 32 e-mail error blocks (send and receive errors in total) can be stored.
-
The contents of the area can be checked using the shared memory readout menu in the programming
-
tool.
E-mail send log area <Bank 11H Addresses 000H to 1FFH>
E-mail send history is stored when e-mail error log is requested.
-
Up to the latest 32 e-mail send blocks can be stored.
-
The contents of the area can be checked using the shared memory readout menu in the programming
-
tool.
E-mail receive log area <Bank 11H Addresses 200H to 3FFH>
E-mail receive history is stored when e-mail error log is requested.
-
Up to the latest 32 e-mail receive blocks can be stored.
-
The contents of the area can be checked using the shared memory readout menu in the programming
-
tool.
Reference: Shared memory readout menu in the programming tool
1. On the "Tools" menu, select "Display PLC Shared memory". This reads the "PLC".
2. Specify the slot No. and the bank No.
3. The log information is read.
-
4-7