Panasonic FP2 ET-LAN Technical Manual page 182

Format of Response Mail (Sent from a programmable controller)
-
E-mail to be sent back from the ET-LAN unit is as follows:
Example of a Response Mail
(1) Subject:
"Response" is entered in the "Subject" column in the Response Mail.
(2) MEWTOCOL response:
MEWTOCOL-COM response is sent back from the programmable controller.
(3) Signature for Response Mail
A signature specified in Receive Option of Configurator ET is attached to the Response Mail.
Error messages
When a message as shown below is written in the Response Mail ( (2) in the example above), check the
Request Mail.
Error message
No good: password
No good: subject
No good: command format
No good: multi frame
CPU response timeout error
11-14
Description
A security password is not correct.
A subject is not correct.
METOCOL-COM command format is not correct.
Correct format:
"<" and "%" are written in the header.
** (BCC) is written in the last of the command.
A multiframe command is sent.
No response is returned from the CPU unit.