Sending/Receiving E-Mails Using E-Mail Function - Panasonic FP2 ET-LAN Technical Manual

11.4 Sending/Receiving E-mails Using E-mail Function

Before sending and receiving e-mails with the ET-LAN unit, initialization processing for the ET-LAN unit
must be completed. The e-mail function can be used regardless of the auto connection function status.
That is, the e-mail function can be used either the mode setting switch 2 is ON or OFF.
E-mail sending and receiving procedure using the ET-LAN unit
-
Initialization /
Auto initialization processing
E-mail sending/
Receiving processing
Termination/
Auto termination
processing
Relations between initialization processing and E-mail sending/receiving processing
-
-
Note:
When the initialization complete signal is ON, e-mails can be sent/received.
When the e-mail setup tool (Configurator ET) is used, e-mail settings can be changed either the
initialization complete signal is ON or OFF.
11-6
Reference:
When the auto connection function is OFF:
Refer to Chapter 5 "Initialization processing and
Termination processing".
When the auto connection function is ON:
Refer to 10.1.2 "Auto Initialization Processing" of this
manual.