2. Assembly
2.3.1 Replacing a complete module or interlinking block
1
Connector screws
Fig. 2/9: CPX terminal with connection block and interlinking blocks in metal version
Dismantling
2−18
The interlinking blocks in the metal version are each linked to
the adjacent interlinking block or end plate by means of
screws.
1
Proceed as follows in order to remove a complete module or
a interlinking block:
1. Dismantle the CPX terminal
2. Unscrew and remove completely the two screws on the
interlinking block you wish to remove (see Fig. 2/9). The
interlinking blocks are now held together only by the elec
trical plug connectors.
Caution
Make sure that the electric plug connectors of the interlink
ing blocks are not bent.
1
Festo P.BE−CPX−SYS−EN en 0902e
1