System Data: Handheld; System Data: Force Mode - Festo CPX System Manual

B. Parameters and data of the CPX terminal

System data: Handheld

Function no. 0
Description Specifies whether or not a handheld is connected.
Bit Bit 5
Values Handheld
Bit 5 Description
0 Handheld not connected
1 Handheld connected
Note Information for the higher−order controller
If necessary for test purposes, a parametrisation carried out by handheld is to be
cancelled by reloading the parameters, or forcing by higher−order PLC/IPC is to
be blocked whilst a handheld is connected.
Tab. B/50: Handheld

System data: Force mode

Function no. 0
Description Specifies whether Force is blocked or enabled.
Bit Bit 6
Values Force mode
Bit 6 Description
0 Disabled
1 Enabled
Note See also system parameter Force mode."
Tab. B/51: Force mode
B−38
[Handheld]
−
[connection OK]
[Force mode]
[Disabled]
[Enabled]
Festo P.BE−CPX−SYS−EN en 0902e