Festo CPX System Manual page 15

Contents and general safety instructions
Type Title
Description
System description"
Electronics
Type P.BE−CPX−SYS−...
CPX bus node"
Type P.BE−CPX−FB...
CPX I/O modules"
Type P.BE−CPX−EA−...
CPX analogue I/O mo
dules"
Type P.BE−CPX−AX−...
"CPX−CP interface"
Type P.BE−CPX−CP−..
Handheld"
Type P.BE−CPX−MMI−1−..
MPA electronics modu
les"
Type P.BE−MPA−
ELEKTRONIK−...
Manual CPX−FEC"
Electronics Type P.BE−CPX−FEC−...
Software FST"
package
Table 0/1: Descriptions for the CPX terminal
Festo P.BE−CPX−SYS−EN en 0902e
Description
Overview of structure, components and mode
of operation of CPX terminals;
installation and commissioning instructions as
well as basic principles of parametrisation
Instructions on assembly, installation, commis
sioning and diagnostics of the relevant bus
nodes
Notes on connections and instructions on fit
ting, installing and commissioning input and
output modules of type CPX−.... and the MPA,
CPA and Midi/Maxi pneumatic interfaces
Notes about connection types and instructions
for fitting, installing and commissioning CPX
analogue I/O modules
Instructions on fitting, installing, commissio
ning and diagnosing CP systems with the
CP interface type CPX−CP−4−FB
Instructions for commissioning and diagnosing
CPX terminals with the handheld type CPX−
MMI−1
Instructions on assembly, installation, commis
sioning and diagnostics of the MPA pneumatic
and electronic modules.
Instructions for fitting, installing,
commissioning and diagnosing the
CPX Front End Controller.
Programming in statement list and ladder
diagram for the FEC
part 1
XIII