Procedure For Commissioning; Commissioning Steps - Festo CPX System Manual

4. Commissioning
4.1

Procedure for commissioning

3
1
Step 1 Checking the valve/cylinder combinations (see manual for the specific
pneumatics)
2
Step 2 Checking the I/O assignment
3
Step 3 Commissioning the CPX terminal on the fieldbus and checking the
address assignment, if necessary, without connected actuators by means of
LED (see manual for the specific CPX bus node)
Fig. 4/1: Commissioning steps
Festo P.BE−CPX−SYS−EN en 0902e
In order to avoid connecting errors and addressing errors,
you should carry out commissioning in steps as follows.
The individual commissioning steps are shown in Fig. 4/1.
2
1
4−3