Festo CPX Assembly Instructions

Assembly instructions (original: de)
8031498
1401NH
[8031400]
Terminal CPX
CPX, CPX-M
1. Safety instructions and notes on mounting .............................................. 1
2. Parts list ................................................................................................... 2
3. Intended use ............................................................................................ 2
4. Wall mounting .......................................................................................... 3
4a. Check positions of the mountings ....................................................... 3
4b. Assemble mountings ........................................................................... 3
4c. Overview of the fastening points ......................................................... 4
5. H-rail mounting ........................................................................................ 5
5a. Mount H-rail ........................................................................................ 5
5b. Mount CPX-terminal to H-rail ............................................................... 5
1. Safety instructions and notes on mounting
Electric voltage.
Injury (death) due to electric shock.
 Switch off power supply before assembly work.
†‡
Festo AG & Co. KG
Unexpected movement of components.
Postfach
Injury due to electric shock, impact, squeezing.
73726 Esslingen
 Switch off compressed air before assembly work.
Germany
+49 711 347-0
www.festo.com
Electrostatic charge.
Damage to the internal electronics.
 Electrostatically discharge assembly personnel prior to assembly work.
Malfunction due to incorrect earthing.
 Earth in accordance with regulations
Malfunction and material damage due to incorrect assembly.
 Plan sufficient space:
– permit heat dissipation through air circulation
– permit access to the connections.
Requirements of the mounting surface:
– torsion-free operation of the product
– acceptance of the weight and other forces that occur.
 Observe assembly conditions ( following tables).
Resistance to vibra-
tion/ resistance to
shock
Vibration
Shock
Continuous shock
Vibration load
Frequency range
SL1
2 ... 8
8 ... 27
27 ... 58
58 ... 160
160 ... 200
Shock load
Acceleration
SL1
±150
Continuous shock load
Acceleration
±150
1)
1)
Warning
Caution
Note
Note
 CPX-system description: Potential equalisation.
Note
 CPX-system description.
in accor-
dance with
EN 60068
Part 2-6
Part 2-27
Part 2-27
[Hz]
Acceleration
SL2 SL1
2 ... 8 −
8 ... 27 10
27 ... 60 −
60 ... 160 20
160 ... 200 10
2
[m/s ]
Duration
SL2 SL1
±300 11
2
[m/s ]
Duration
6
SL1 = Severity level 1
SL2 = Severity level 2
Wall H-rail
1)
SL2 SL1
SL2 SL1
SL1 SL1
2
[m/s ]
Displacement
SL2 SL1 SL2
− ±3.5 ±7
10 − −
− ±0.15 ±0.7
50 − −
10 − −
[ms]
Shocks per direction
SL2 SL1 SL2
11 5 5
[ms]
Shocks per direction
1000
[mm]
1