B.2.2 System Parameters - Festo CPX System Manual

B. Parameters and data of the CPX terminal

B.2.2 System parameters

Function no.
4400
4401
4402
4402
4402
4402
4402
1)
Only relevant with certain fieldbus protocols (see manual for CPX bus node)
Tab. B/3: Overview system parameters
[........]
B−8
The system parameters refer to global functions of the CPX
terminal. The following system parameters are available:
System parameters
Reserved
Monitoring (active/inactive)
Fail safe (reaction to communication faults)
Force mode (enable/block force)
System Idle mode (reaction when changing into the Idle status)
System start
Analogue process value display (data format)
The data and parameters which appear in English on the
handheld are shown in square brackets in this manual,
e.g. [Debounce time].
.
1)
1)
Festo P.BE−CPX−SYS−EN en 0902e