Selecting The Patient; Preparing The Patient - Zeiss CLARUS 500 Instructions For Use Manual

7 Operation

7.3 Preparing the Patient

Action
NOTE
100 / 192

7.2.2 Selecting the Patient

Finding a patient's name can vary depending on the systems you
use.
• If you use an EMR system:
– The patient's name might be listed under Today
– If the patient is not listed under Today, search for their
name or ID (See Finding a Patient [} 99]).
– If the patient is not in the database, add the patient's infor-
mation. (See Adding a Patient [} 49]).
• If you do not use an EMR system:
– Search for the patient's name or ID Search (See Finding a
Patient [} 99]).
– If the patient is not in the database, add the patient's infor-
mation. (See Adding a Patient [} 49]).
To select a patient:
1. Find the patient's name using the list or search and select the
patient's name.
2. Click Acquire.
7.3 Preparing the Patient
Keep the front of the lens clean.
The quality of image capture is affected by the cleanliness of the
front lens.
Avoid touching the lens with anything but approved cleaning
u
equipment.
Use the protective cover to keep dust off the lens when the
u
device is not in use.
For complete instructions on cleaning the lens, refer to: Cleaning
and Disinfection [} 149]
Instructions for Use
CLARUS® 500
2660021171806 Rev. A 2019-01