Software Installation; Installing Review Software - Zeiss CLARUS 500 Instructions For Use Manual

3 Installation

3.2 Software Installation

NOTE
NOTE
38 / 192
The CLARUS® 500 instrument arrives on a pallet with three boxes
that contain all parts and accessories needed to assemble the
instrument and table.
3.2 Software Installation
The CLARUS® 500 system ships with software installed on your
instrument. From time to time you will be notified to upgrade
system software (Upgrading Instrument and Review Software
[} 42]).
You can install review software on any compatible laptop or
computer that clinicians use to review scanned images (Installing
Review Software [} 38]).

3.2.1 Installing Review Software

You can install review software on computers that clinicians use to
compare, analyze, annotate and save scans acquired on CLARUS®
500.
If you need to uninstall review software, use the Windows
control panel for adding and removing programs.
The computer must meet the following minimum requirements:
• Runs on:
– Windows 7
– Windows 8
– Windows 10
– Windows 2008 Server R2
– Windows 2012 Server R2
• Has an Intel processor with a Passmark benchmark score of at
least 5675
• Has at least 8 GB of memory
• Has a monitor with resolution set to at least 1024 x 768
Review software does not support: adding, editing, or
deleting a patient record.
Adding, editing, or deleting a patient record
Deleting a scan
Adding users or user accounts
Adding, editing, or deleting the Institution data
1
2660021171806 Rev. A 2019-01
Instructions for Use
CLARUS® 500