5 Configuration
5.4 Managing Data
Prerequisite
Action
54 / 192
ð A confirmation opens.
2. Click Delete.
5.4.1.5 Manually Correcting Laterality
You can change the laterality of an image after it is saved using the
Review or Proof screen.
Laterality change feature does not work under the following condi-
tions:
• After the data is exported
• In connected mode (FORUM)
• On imported data
To correct laterality manually in Proof:
þ Proof Sheet is open.
1. Right-click on the image you want to change.
2. Select Change Laterality.
ð A confirmation opens.
3. Click OK.
1
Instructions for Use
CLARUS® 500
2660021171806 Rev. A 2019-01