Positioning The Patient - Zeiss CLARUS 500 Instructions For Use Manual

7 Operation
7.3 Preparing the Patient
CAUTION!
Action
102 / 192
1
2. Rest your hand against the back of the forehead rest and lift
the patient's eyelid.

7.3.3 Positioning the Patient

Pinch hazard for hands and fingers.
Keep operator and patient hands and fingers away from
u
crosstable during alignment and image capture.
To position the patient:
1. Adjust the table (and patient chair, if needed) until the patient
can comfortably reach the headrest and chin rest.
2. To move the table up, press and hold the up arrow (1).
3. To move the table down, press and hold the down arrow (2).
4. Ask the patient to:
ð Sit comfortably with feet flat on the ground.
1
Instructions for Use
CLARUS® 500
2
2660021171806 Rev. A 2019-01