Manage Backups - Zeiss CLARUS 500 Instructions For Use Manual

5 Configuration
5.4 Managing Data
Prerequisite
Action
66 / 192
• Must be at least seven characters long.
• Must contain at least three of the following:
– English uppercase characters (A through Z)
– English lowercase characters (a through z)
– Numbers (0 through 9)
– Non-alphabetic characters (for example: !, $, #, %)
• Must not contain the user's account name.
• Must not contain two consecutive letters of the user's name.

5.4.3 Manage Backups

On the CLARUS® 500, you can enable data backup each time the
system shuts down (Configuring Automatic Backups [} 66]). You
can also back up data manually at any time (Backing Up Data
Manually [} 67]).
5.4.3.1 Configuring Automatic Backups
You can save a backup copy of selected data at any time. You can
save this data on removable media for import into other applica-
tions.
To configure automatic backups:
þ Settings are open (Opening Settings [} 47]).
1. Insert the removable media into the USB port.
2. Click Settings > Maintenance.
ð The Maintenance window opens.
3. Slide Data backup on Shutdown to Backup Enabled.
4. Click Browse.
Instructions for Use
CLARUS® 500
2660021171806 Rev. A 2019-01