Logging Off; Shutting Down - Zeiss CLARUS 500 Instructions For Use Manual

Instructions for Use
CLARUS® 500
Action
CAUTION!
Action
2660021171806 Rev. A 2019-01

7.6.1 Logging Off

To log off:
1. Select the X in the upper right corner.
2. Select Log off.

7.6.2 Shutting Down

Do not use the power switch to shut down the system
or you could interrupt automatic archiving or interrupt operating
system updates.
Each time you shut down the system, all shutdown activity
completes (if set) and CLARUS® 500 retains a log of the actions
completed. Activities that can be set to run each time the system
shuts down include:
• Export images and patient data to DICOM (Configuring Export
Settings [} 59])
• Automatic backups (Configuring Automatic Backups [} 66])
Do not switch off the power until the CLARUS® 500 application
and Widows have both shut down completely.
To shut down the system:
1. To exit the application, click on the X in the upper right corner.
2. Select Shut down.
ð The application closes and automatic shutdown tasks run.
3. When application shutdown is complete, click the Windows
icon on the desktop (lower left corner) and select Shut down.
7 Operation
7.6 Shutdown
147 / 192