Hardware Overview - Zeiss CLARUS 500 Instructions For Use Manual

Instructions for Use
CLARUS® 500
2660021171806 Rev. A 2019-01

2.6.2 Hardware Overview

The CLARUS® 500 is connected to the All-in-One PC using cables
mounted under the table. The operator controls the instrument and
software using the instrument joystick, the All-in-One PC touch-
screen, wireless keyboard and touchpad.
2.6.2.1 System Hardware
6
Figure 1: System Hardware
1 CLARUS® 500 Acquisition
Head
3 Keyboard Tray
5 Keyboard
1
5
2 All-in-One PC
4 Touchpad
6 Joystick
2 Introduction
2.6 System Overview
2
3
4
25 / 192