Zeiss CLARUS 500 Instructions For Use Manual page 136

7 Operation
7.5 Analyze Images
Result
Prerequisite
Action
136 / 192
3. Touch or click on the appropriate starting point and drag to the
area you want the arrow to point.
4. Close the annotations panel.
ü The arrow appears on the image.
7.5.5.4.4 Adding Measurements to Images
When you draw caliper lines on an image, the review software
calculates the measurement. After you draw caliper lines, you can
edit, move or delete them.
To add measurements to images:
þ The Analyze window is open (Opening the Analyze Window
[} 126]).
þ The Annotation tool is selected (Selecting the Annotation Tool
[} 134]).
1. Select the Caliper tool.
2. Touch or click on the appropriate starting point on the image
and drag to the appropriate end point.
Instructions for Use
CLARUS® 500
2660021171806 Rev. A 2019-01