Accessories And User Replaceable Spare Parts; Parts Orders; Domestic Parts Ordering; International Service Operations - Zeiss CLARUS 500 Instructions For Use Manual

Instructions for Use
CLARUS® 500
WARNING!
NOTE
NOTE
2660021171806 Rev. A 2019-01
12 Accessories and User Replaceable Spare
Parts
This section contains parts lists for this instrument, instructions for
ordering parts and instructions for returning defective parts.
Using parts that are not authorized by ZEISS
may compromise device safety during operation.
Use only accessories authorized by ZEISS.
u
In the U.S., call 800–341–6968. Outside the U.S., contact your
u
local Zeiss distributor. You can find the ZEISS contact partner
for your country on our website: www.zeiss.com.
The procedure for returning defective parts from Interna-
tional operations differs somewhat from that for U.S.
domestic operations
These differences are noted in the instructions.
Please follow the instructions carefully.
u
Part numbers are subject to change
When ordering, confirm all part numbers with your ZEISS
u
Representative.

12.1 Parts Orders

12.1.1 U.S. Domestic Parts Ordering
Spare parts may be ordered as needed following established parts
ordering procedures. Parts needed overnight may be ordered by
phone from the Parts Department. The cost of shipping parts for
next day delivery is very high and should be used only in
emergencies. The Parts Department phone number is:
• 1-800-341-6968 (domestic toll-free)
• 1-925-557-4843 (domestic)
• 1-925-557-4652 (domestic fax)

12.1.2 International Service Operations

Customers are billed for shipping charges, including any customs
fees required.
For International Service Operations, please use the ordering proce-
dures that have been established for your area of operations, and
which meet the requirements of the Carl Zeiss Meditec Interna-
tional Parts Department.

12 Accessories and User Replaceable Spare Parts

12.1 Parts Orders
169 / 192