Checking Scan Quality; Deleting Or Replacing An Image - Zeiss CLARUS 500 Instructions For Use Manual

7 Operation
7.4 Acquire Images
Action
Result
Prerequisite
Action
124 / 192
3. Position the target where you want the patient to focus.

7.4.12 Checking Scan Quality

Once data acquisition is complete, scans must be reviewed for
acceptance prior to being released for analysis.
Review all scans carefully. If possible, retake scans that do not pass
the acceptance criteria (Deleting or Replacing an Image [} 124]).
To check scan quality:
1. Check that the focus is sharp and clear.
2. Ensure that the image is illuminated uniformly.
3. Ensure that there are few to no artifacts that cast shadows on
the image.
ü If image quality is degraded, contact ZEISS customer service
(https://www.zeiss.com/).

7.4.13 Deleting or Replacing an Image

To delete or replace an image:
þ You reached the image check step in a Scan Acquisition task.
þ You want to delete or replace an image.
1. In the selection bin, locate the image you want to recapture.
Instructions for Use
CLARUS® 500
1
2
3
2660021171806 Rev. A 2019-01