Viewing Stereo Images; Saving Edited Images - Zeiss CLARUS 500 Instructions For Use Manual

Instructions for Use
CLARUS® 500
Prerequisite
Action
Result
Prerequisite
Action
2660021171806 Rev. A 2019-01

7.5.7 Viewing Stereo Images

Stereo image pairs can be viewed in stereo mode. When you view
image pairs in stereo mode, viewports are linked, so that pan and
zoom apply to both images.
When Stereo Mode is selected, all non-stereo images are filtered
out of the selection bin and only 2-up and 4-up viewing options are
available for viewing the selected Stereo pairs.
To view stereo images:
þ The Review screen is open.
1. Click the Stereo icon.
ü Only stereo image pairs appear in the selection bin.

7.5.8 Saving Edited Images

You can save the original image with the edits and annotations you
made or you can save a copy of the edited image. The thumbnail
identifies images that were edited.
If you did not make any changes to an image you select to save, no
changes or copies of the image are made.
To save an edited image:
þ Analyze > Review window is openOpening the Analyze
Window [} 126].
þ Edits and annotations are made (as required) on image(s).
1. Click the Save icon.
ð Images that you edited or annotated are automatically
selected and identified to Save.
2. To deselect an image, click on its thumbnail.
ð Save changes to Discard Edits.
3. To save the original image(s) with your editing and annotations,
click Save.
7 Operation
7.5 Analyze Images
145 / 192