Instructions for Use
CLARUS® 500
CAUTION!
NOTE
Action
2660021171806 Rev. A 2019-01
4 Daily Startup
4.1 Turn on the Instrument
Do not unplug the instrument during startup
or instrument may not start up successfully.
Make sure the instrument has completed its system checks
u
before you unplug or remove power.
Each time you turn on the CLARUS® 500, system diagnostics
checks that the system initialized correctly and is running properly.
If the diagnostic check detects any problems, an error or alert
message displays. For more information about startup errors and
alerts, refer to: Troubleshooting [} 155].
If a critical system test fails
take the device out of service.
Contact your ZEISS representative.
u
If a non-critical test fails or a warning appears, the device can
u
still be used. Contact your ZEISS representative. (See Mainte-
nance.)
To turn on the instrument:
1. Turn on the instrument.
2. When the system test sequence completes, click Continue.
3. Log in (Logging In [} 46]).
ð The Patient window displays.
4 Daily Startup
4.1 Turn on the Instrument
45 / 192