Sma Connectors (Differential); Multi-Gigabit Transceivers (Gtp Mgts) - Xilinx SP605 Hardware User's Manual

Chapter 1: SP605 Evaluation Board

SMA Connectors (Differential)

A high-precision clock signal can be provided to the FPGA using differential clock signals
through the onboard 50Ω SMA connectors J38 (N) and J41 (P).
Table 1-9: SP605 Clock Source Connections

8. Multi-Gigabit Transceivers (GTP MGTs)

The SP605 provides access to 4 MGTs.
•
•
•
•
The SP605 includes a set of six SMA connectors for the GTP (MGT) RX/TX Port and GTP
(MGT) Clock as described in
28
Source U1 FPGA Pin
U6 200MHZ OSC
X2 27MHZ OSC
USER_SMA_CLOCK
SMA Connectors
One (1) MGT is wired to the PCIe x1 Endpoint (P4) edge connector fingers
One (1) MGT is wired to the FMC LPC connector (J2)
One (1) MGT is wired to MGT SMA connectors (J36, J37)
One (1) MGT is wired to the SFP Module connector (P2)
www.xilinx.com
Schematic Net Name
K22 SYSCLK_N
K21 SYSCLK_P
AB13 USER_CLOCK
M19 USER_SMA_CLOCK_N
M20 USER_SMA_CLOCK_P
Figure 1-10 and Table 1-10.
Pin
Pin Name
Number
5 OUT_B
4 OUT
5 OUT
J38.1 –
J41.1 –
SP605 Hardware User Guide
UG526 (v1.9) February 14, 2019