Placing An Intercom Call To The Target Extension; Picking Up An Incoming Call Of The Target Extension - Yealink SIP-T29G User Manual

1. Navigate to Menu->Features->Dsskey.
2. Select the desired line key.
3. Select Intercom from the Type field.
4. Select the desired line from the Account ID field.
5. Do one of the following:
(Optional.) Enter the string that will display on the phone screen in the Label field.
l
Enter the target extension number in the Value field.
For the SIP-T29G IP phones, highlight the Label or Value field. Press Directory (Dir) and then select the desired
l
contact from the Directory list(s).
6. Press Save.
Tip
By default, you can long press the desired line key to set it. But your system administrator can configure the phone to enter
the Add Contact screen by long pressing the line key.

Placing an Intercom Call to the Target Extension

You can place an intercom call when the phone is idle or during a call. The target phone plays a warning tone and auto-
matically answers the call in speakerphone (hands-free) mode by default.
When the target phone has an active call, the intercom call is answered automatically after the active call ends.
Before You Begin
You need to set an Intercom key in advance. If you are using the SIP-T19(P) E2 IP phones, check with your system
administrator if the Intercom key has set for your phone.
Procedure
1. Press the intercom key.
2. To end the intercom call, press the intercom key again or End Call (EndCall).
Tip
You can also press the BLF/BLF List key to initiate an outgoing intercom call to the monitored user. Check with your system
administrator to find out if it is available on your phone.
Related Topic
Setting an Intercom Key

Picking Up an Incoming Call of the Target Extension

When a target extension receives an incoming call, you can pick up the incoming call by pressing the Intercom key.
Check with your system administrator to find out if this feature is available on your phone.
Before picking up an incoming call, make sure that the directed call pickup code has been configured either for an
Intercom key or for Call Pickup feature in advance.
Note
If the directed call pickup code is not set, the phone will place a call to the target extension instead of picking up an incom-
ing call of the target extension when you press the intercom key.
Topics
Setting the Directed Call Pickup Code for Intercom Key
Advanced Features
111