Updating The Phone Configuration - Yealink SIP-T29G User Manual

Yealink T2 Series IP Phones User Guide
The phone will be reset successfully after startup.
Note
Reset of your phone may take a few minutes. Do not power off until the phone has started up successfully.

Updating the Phone Configuration

Your system administrator may ask you to update your phone configurations.
Procedure
1. Navigate to Menu->Settings->Basic Settings->Update Configuration.
On the SIP-T29G IP phones, navigate to Menu->Basic->Update Configuration.
A message is displayed on the phone screen:
2. Press OK.
Tip
You can also long press the REDIAL key when the phone is idle to update the phone configuration.
136