Adding A Wireless Network Manually - Yealink SIP-T29G User Manual

On the SIP-T29G IP phones, navigate to Menu->Basic->Wi-Fi.
2. Press WPS, and then select WPS.
The phone screen prompts "WPS has been activated, connect in 120s!".
3. Long press the WPS key on your gateway or router.
Once the WPS setup has completed successfully, the phone screen will prompt "Connect Success.".
Personal Identification Number (PIN)
Procedure
1. Navigate to Menu->Settings->Basic Settings->Wi-Fi.
On the SIP-T29G IP phones, navigate to Menu->Basic->Wi-Fi.
2. Press WPS, and then select WPS-PIN.
The phone screen prompts "Please input below PIN code on your Wi-Fi router and press OK to connect: xxx".
3. Log into your gateway or router's web interface, and configure it to search the clients. For more information, refer
to the documentation from the gateway or router manufacturer.
Once WPS-PIN setup has completed successfully, the web interface of the gateway or router will prompt the con-
nection is successful.
Related Topic
Activating the Wi-Fi Mode

Adding a Wireless Network Manually

If SSID broadcast on your gateway or router is disabled, the wireless network might not appear in the scanning results.
In that case, you must manually add a wireless network. The connected wireless networks will be saved to Known Net-
work(s) list.
Before You Begin
Get the available wireless network information from your system administrator. Make sure that the Wi-Fi mode is activ-
ated. The Known Network(s) list can store up to 5 wireless networks.
Procedure
1. Navigate to Menu->Settings->Basic Settings->Wi-Fi.
On the SIP-T29G IP phones, navigate to Menu->Basic->Wi-Fi.
2. Highlight Known Network(s), and then press Add.
3. Use the WLAN settings obtained from your gateway/router to configure this WLAN Profile on the IP phone. Do the
following:
If you select None or WEP from the Security Mode field, enter the desired values in the corresponding fields.
l
If you select WPA-PSK, WPA2-PSK, WPA-EAP or WPA2-EAP from the Security Mode field, select the desired
l
cipher type first and enter the desired values in the corresponding fields.
4. Press Save.
The connected wireless networks will be saved to Known Network(s) list.
Related Topic
Activating the Wi-Fi Mode
Optional Accessories with Your Phone
129