Rebooting Your Phone; Resetting To Factory Settings - Yealink SIP-T29G User Manual

3. Press Start.
The screen displays the network status information.
4. Press Back to go back to the preview screen.

Rebooting Your Phone

The improper operation may cause malfunction. If the malfunction occurs, your system administrator may ask you to
reboot your phone.
Procedure
1. Navigate to Menu->Settings->Basic Settings->Reboot.
On the SIP-T29G IP phones, navigate to Menu->Basic->Reboot.
The phone screen prompts you whether to reboot the phone.
2. Press OK to reboot the phone.
Tip
You can also long press the X key on the keypad when the phone is idle to reboot the phone.

Resetting to Factory Settings

Generally, some common issues may occur while using the IP phone. Your system administrator may ask you to reset
your phone to factory configurations after you have tried all troubleshooting suggestions but still do not solve the
problem. This operation will delete all your personal configuration settings, and reset all settings to the factory
defaults. Check with your system administrator if the personalized settings are kept before resetting your phone to fact-
ory settings.
Procedure
1. Navigate to Menu->Settings->Advanced Settings->Reset Config.
On the SIP-T29G IP phones, navigate to Menu->Advanced->Reset Config.
2. Highlight the Reset to Factory Settings, and then press Reset.
The phone screen prompts you whether to reset the setting.
3. Press OK.
The phone begins resetting.
Tip
You can also long press the OK key when the phone is idle.
After reset, the screen prompts "Welcome Initializing...Please wait".
Maintaining Your Phone
135