Connecting The Bluetooth Usb Dongle Bt40; Activating The Bluetooth Mode; Deactivating The Bluetooth Mode; Pairing And Connecting The Bluetooth Headset - Yealink SIP-T29G User Manual

Yealink T2 Series IP Phones User Guide

Connecting the Bluetooth USB Dongle BT40

Procedure
1. Insert the USB dongle with "TOP" facing upwards into the USB port on the back of the phone.
For more information on Bluetooth USB dongle BT40, see the user guide for Bluetooth USB dongle BT40 on
Technical Support.

Activating the Bluetooth Mode

When you insert Bluetooth USB dongle BT40 into the USB port on the back of the IP phones, a message is displayed on
the phone screen:
You can press OK to activate the Bluetooth mode directly.
If you press Cancel, you can activate the Bluetooth mode when you want to use the Bluetooth feature.
Procedure
1. Navigate to Menu->Settings->Basic Settings->Bluetooth.
On the SIP-T29G IP phones, navigate to Menu->Basic->Bluetooth.
2. Select On from the Bluetooth field.
3. Press Save.
The IP phone scans the available Bluetooth devices automatically.

Deactivating the Bluetooth Mode

You can deactivate the Bluetooth mode when you no longer use a Bluetooth device.
Procedure
1. Navigate to Menu->Settings->Basic Settings->Bluetooth.
On the SIP-T29G IP phones, navigate to Menu->Basic->Bluetooth.
2. Select Off from the Bluetooth field.
3. Press Save.
The Bluetooth device will not be connected anymore, but it will still be paired. When you activate the Bluetooth mode
again, the paired Bluetooth device will appear in the Paired Bluetooth Device list.

Pairing and Connecting the Bluetooth Headset

Before You Begin
Make sure that the Bluetooth headset is discoverable.
122
Yealink