Parking Or Retrieving A Call By Blf Key; Parking A Call; Retrieving A Parked Call; Blf List - Yealink SIP-T29G User Manual

Yealink T2 Series IP Phones User Guide
2. Press the BLF key of the monitored line again or (Trans) to complete the transfer when the monitored user receives
ringback or after the monitored user answers the call.

Parking or Retrieving a Call by BLF Key

You can use the BLF key to park a call or retrieve a parked call directly.
Note
Check with your system administrator to find out if it is available on your phone.
Topics

Parking a Call

Retrieving a Parked Call

Parking a Call
Before You Begin
Your system administrator has set call park feature in the FAC mode in advance.
Procedure
1. During a call, press Park (You may need to press the More soft key to see the Park soft key).
2. Press the desired BLF key to park the call to the monitored line.
Retrieving a Parked Call
Before You Begin
Your system administrator has set call park feature in the FAC mode.
Procedure
1. Press Retrieve on the dialing screen.
2. Press the desired BLF key to retrieve a call that is parked to the monitored line.

BLF List

BLF List feature enables you to monitor a list of users defined by your system administrator. For example, your system
administrator has enabled BLF List feature and created a BLF List URI (for example, BLFList@example.com) with user1
and user2 in the list on the server. After configuration, the BLF List keys on the IP phone can present the status of user1
and user2, and the respective key LEDs or icons will either flash or glow depending on the status of monitored lines.
It is not available on the SIP-T19(P) E2/CP920 IP phone. Check with your system administrator to find out if this feature
is available on your phone.
Topics
State Indicator of Remote Line by BLF List Key
Audio Alert for Monitored Lines
Visual Alert for Monitored Lines
Picking up a Remote Call by BLF List Key
Transferring a Call by BLF List Key
Parking a Call by a BLF List Key
Retrieving a Call by a BLF List Key
102