Enabling Anonymous Call; Placing An Anonymous Call - Yealink SIP-T29G User Manual

Topics

Enabling Anonymous Call

Placing an Anonymous Call

Enabling Anonymous Call
Before You Begin
Check with your system administrator if the anonymous call on code or off code is required. If required, get it from
your system administrator.
Procedure
1. Navigate to Menu->Features->Anonymous Call (Anonymous).
2. Select the desired line from the Line ID field (not for the SIP-T19(P) E2 IP phone).
For the SIP-T29G IP phones, select the desired line.
3. Select Enabled from the Local Anonymous field.
4. (Optional.) Select the desired value from the Send Anony Code (Send Anonymous Code) field.
5. (Optional.) Enter the anonymous call on code and off code respectively in the On Code and Off Code field.
6. Press Save.
Placing an Anonymous Call
Before You Begin
Enable anonymous call for a specific line.
Procedure
1. Select the anonymous line to place a call.
The callee is prompted with an incoming call from anonymity.
If the callee enables anonymous rejection feature, you may be prompted that the callee does not accept calls from an
anonymous number.
Call Features
61