Yealink T2 Series IP Phones User Guide
Activating the Bluetooth Mode
Pairing and Connecting the Bluetooth-enabled Mobile Phone
Editing Device Name of your Phone for Recognition
You can edit the device name of your phone to display in scanning list of other Bluetooth devices.
Before You Begin
Make sure that the Bluetooth mode is activated.
Procedure
1. Navigate to Menu->Settings->Basic Settings->Bluetooth->Edit My Device Information.
On the SIP-T29G IP phones, navigate to Menu->Basic->Bluetooth->Edit My Device Information.
The phone screen displays the device name and Bluetooth dongle MAC address.
2. Enter the desired name in the Device Name field.
3. Press Save.
Related Topic
Activating the Bluetooth Mode
Deleting the Paired Bluetooth Device
You can delete your Bluetooth device from your phone. When you delete the Bluetooth device, it disappears from the
Paired Bluetooth Device list.
Procedure
1. Navigate to Menu->Settings->Basic Settings->Bluetooth->Paired Bluetooth Device.
On the SIP-T29G IP phones, navigate to Menu->Basic->Bluetooth->Paired Bluetooth Device.
2. Press Option, and then select Delete or Delete All.
The phone screen prompts you whether to delete the device.
3. Press OK to delete.
Disconnecting the Bluetooth Device
You can disconnect the Bluetooth device from your phone. After you disconnect the Bluetooth device, it remains
paired so you can easily connect it to your IP phone next time.
Procedure
1. Navigate to Menu->Settings->Basic Settings->Bluetooth->Paired Bluetooth Device.
On the SIP-T29G IP phones, navigate to Menu->Basic->Bluetooth->Paired Bluetooth Device.
2. Highlight the connected Bluetooth device, and then press Disconnect.
The Bluetooth device is disconnected when deactivating the Bluetooth mode.
Tip
You can quickly disconnect your Bluetooth headset by turning your headset off. When you turn your Bluetooth headset on,
the Bluetooth headset is connected again.
Related Topic
Deactivating the Bluetooth Mode
126