Barging In An Active Call By Blf List Key; Shared Line; State Indicator Of Shared Line - Yealink SIP-T29G User Manual

Yealink T2 Series IP Phones User Guide

Barging In an Active Call by BLF List Key

You can use the BLF List key to barge in a conversation and set up a conference call.
Before You Begin
Check with your system administrator to find out if this feature is available on your phone.
Procedure
1. Do one of the following:
Press the BLF List key.
l
Long press the BLF List key.
l
The Barge In, Send, New Call and Cancel appear on the screen.
Press Barge In.
The IP phone dials out the barge-in code followed by the monitored line, and then you can join the call. Each of
the three parties can hear the other two parties.

Shared Line

Yealink IP phone supports using Shared Call Appearance (SCA) or Bridged Line Appearance (BLA) to share a line. So
that this line can be registered on more than one IP phone at the same time.
Your system administrator can set your phone to use the shared line.
Note
Check with your system administrator to find out if SCA or BLA is available on your phone.
Topics

State Indicator of Shared Line

Placing Calls on a Shared Line
Answering Calls on a Shared Line
Placing a Call on Public Hold
Placing a Call on Private Hold
Retrieving a Held Call Remotely on a Shared line
Barging In an Active Call on a Shared line
Pulling a Shared Call on a Shared line
State Indicator of Shared Line
Your system administrator may assign multiple line keys to associate with a shared line, which enhances call visu-
alization and simplifies call handling. Incoming calls to this shared line or outgoing calls from this shared line will be
distributed evenly among the available line keys.
The shared line is indicated by different line key icons (not available on the SIP-T19(P) E2 IP phones):
106