State Indicator Of Remote Line By Blf List Key; Audio Alert For Monitored Lines; Setting An Alert Tone For Monitored Lines - Yealink SIP-T29G User Manual

Barging In an Active Call by BLF List Key
Parking a Call by a BLF List Key

State Indicator of Remote Line by BLF List Key

An idle screen is similar to the one shown below:
The following table shows the LED/icon indicator associated with the line you are monitoring.
LED Status
Solid green
Fast-flashing red
Solid red
Slow-flashing red
Off

Audio Alert for Monitored Lines

Your system administrator can enable Audio Alert for BLF Pickup feature, which allows your phone to play a tone when
the specified monitored line receives an incoming call.
Topic

Setting an Alert Tone for Monitored Lines

Setting an Alert Tone for Monitored Lines
After your system administrator enables the Audio Alert for BLF Pickup feature, you can set the phone to play an alert
tone when a monitored line rings.
Procedure
1. Navigate to Menu->Settings->Basic Settings->Sound->BLF Ring Type.
For the SIP-T29G IP phones, navigate to Menu->Basic->Sound->BLF Ring Type.
2. Select the desired ring tone.
The ring tone is played automatically. You can press the Volume key to adjust the tone volume.
3. Press Save.
Icons
T29G
The monitored line is idle.
The monitored line is ringing.
The monitored line is dialing.
The monitored line is busy or in a call.
The monitored line places a call on hold.
A call is parked to the monitored line.
The monitored line fails to register or does not exist.
Advanced Features
Description
103