Setting The Directed Call Pickup Code For Intercom Key; Picking Up A Remote Call By Intercom Key; Answering An Intercom Call; Setting Intercom - Yealink SIP-T29G User Manual

Yealink T2 Series IP Phones User Guide

Picking Up a Remote Call by Intercom Key

Setting the Directed Call Pickup Code for Intercom Key

The directed call pickup code can be configured for the intercom key.
Before You Begin
Get the directed call pickup code from your system administrator.
Procedure
1. Long press the Intercom key.
2. Enter the directed call pickup code in the Extension field.
3. Press Save.
Related Topic
Setting an Intercom Key
Picking Up a Remote Call by Intercom Key
When the target extension receives an incoming call, the intercom key LED of the target extension will flash green. The
intercom key LED is not available on T19(P) E2.
Before You Begin
The directed pickup code has set for Call Pickup feature by your system administrator or you have assigned the dir-
ected pickup code for an Intercom key in advance.
Procedure
1. Press the Intercom key to pick up the incoming call directly.
Related Topic
Setting the Directed Call Pickup Code for Intercom Key

Answering an Intercom Call

By default, when there is an incoming intercom call, the phone plays a warning tone and this incoming call will be
answered automatically. You can configure the behavior when receiving an intercom call.
Topics

Setting Intercom

Answering an Intercom Call
Setting Intercom
You can configure the following behavior when receiving an intercom call.
Intercom Allow
Intercom Allow feature allows the IP phones to automatically answer an incoming intercom call. If you disable this fea-
ture, the IP phone will handle an incoming intercom call like a normal incoming call. Intercom Allow feature is enabled
by default.
112