Pulling A Shared Call On A Shared Line; Intercom; Placing An Intercom Call; Setting An Intercom Key - Yealink SIP-T29G User Manual

Yealink T2 Series IP Phones User Guide

Pulling a Shared Call on a Shared line

In SCA scenario, both you and other users can pull an existing call from another shared phone that is an active or hold
state.
It is not available on the SIP-T19(P) E2 IP phone. Check with your system administrator to find out if this feature is avail-
able for your phone.
Before You Begin
There is an active or held call on the shared line.
Procedure
1. Long press the line key, and then select a call.
2. Press Call Pull (CallPull) to pull the call.

Intercom

Intercom is a useful feature in an office environment to quickly connect with the operator or the secretary. This enables
you to place an intercom call that is answered automatically on the contact's phone as long as the contact is not in an
active call.
Note
Intercom is not available on all servers. Contact your system administrator for more information.
Topics

Placing an Intercom Call

Picking Up an Incoming Call of the Target Extension
Answering an Intercom Call
Placing an Intercom Call
To use the intercom feature, you should set a line key as an Intercom key in advance. Line key is not available on the
SIP-T19(P) E2 IP phones, so ask your system administrator to set an Intercom key for your phone.
Topics

Setting an Intercom Key

Placing an Intercom Call to the Target Extension
Setting an Intercom Key
Procedure
110