Visual Alert For Monitored Lines; Picking Up A Remote Call By Blf List Key; Transferring A Call By Blf List Key - Yealink SIP-T29G User Manual

Hide thumbs Also See for SIP-T29G:
Table of Contents

Advertisement

Yealink T2 Series IP Phones User Guide

Visual Alert for Monitored Lines

Your system administrator can enable Visual Alert for BLF Pickup feature, which allows your phone to display the caller
ID when the specified monitored line receives an incoming call.
You can pick up the call to the monitored line, place a call to the monitored line, place a new call or go back to the Idle
screen.
Note
Cancel
If you press
to go back to the Idle screen, you can long press the BLF/BLF List key to enter the Calls for Pickup screen
again.

Picking up a Remote Call by BLF List Key

When a monitored line receives an incoming call, you can pick up the incoming call by pressing the BLF List key. For
example, if the monitor user is not at his/her desk and someone rings his/her line, you can pick up the call simply by
pressing the flashing BLF List key. You can also check the caller ID first, and then pick up the incoming call.
Before You Begin
Check with your system administrator to find out if this feature is available on your phone.
Procedure
1. Do one of the following:
Press the BLF List key to pick up the call for the monitored line directly.
l
Long press the BLF List key.
l
The Pick Up, Send, New Call and Cancel appear on the screen.
Press Pick Up to pick up the call.
If there are multiple incoming calls on the monitored line, select the desired call to pick up.

Transferring a Call by BLF List Key

When there is already an active call on the IP phones, you can transfer the active call to the monitored user by pressing
the BLF List key.
The phone transfers (Blind Transfer or Attended Transfer) the active call differently depending on the Transfer Mode via
Dsskey feature configured by your system administrator.
Note
After setting the
BLF List
key successfully, you can perform a call transfer by selecting a transfer mode during a call. Check
with your system administrator to find out if this feature is available on the phone.
Topics
104

Advertisement

Table of Contents
loading

Table of Contents