Speed Dialing A Contact Using A Speed Dial Key; Placing A Call Back To The Last Incoming Number; Setting A Recall Key - Yealink SIP-T29G User Manual

Yealink T2 Series IP Phones User Guide
Procedure
1. Navigate to Menu->Features->Dsskey.
2. Select the desired line key.
3. Select SpeedDial from the Type field.
4. Select the desired line from the Account ID field.
5. Do one of the following:
(Optional.) Enter the string that will appear on the phone screen in the Label field.
l
Enter the contact number you want to dial out directly in the Value field.
You can also enter the contact number with the DTMF sequence that you want to send in the Value field. The
contact number and DTMF sequence are separated by commas. One comma stands for 500 milliseconds. For
example, 1234,,123# means the phone dials out the number 1234 first, then after the call is set up for 1 second,
it sends the DTMF sequence 123# to the remote party.
For the SIP-T29G IP phones, highlight the Label or Value field. Press Directory (Dir) and then select the desired
l
contact from the Directory list(s).
3. Press Save.
Tip
You can long press the desired line key to set it as a Speed Dial key.
Note
After setting the SpeedDial
Check with your system administrator to find out if this feature is available on the phone.

Speed Dialing a Contact Using a Speed Dial Key

Before You Begin
You need to set a line key as a Speed Dial key. If you are using the SIP-T19(P) E2 IP phones, check with your system
administrator if the Speed Dial key has set for your phone.
Procedure
1. Press a Speed Dial key when the phone is idle.
Related Topic
Setting a Speed Dial Key Manually

Placing a Call Back to the Last Incoming Number

You can place a call back to the last incoming number quickly by using a Recall key.
Topics

Setting a Recall Key

Recalling a Contact
Setting a Recall Key
You can set a line key as a Recall key. Line key is not available on SIP-T19(P) E2 IP phones, so ask your system admin-
istrator to set a Recall key for your phone.
Procedure
58
key successfully, you can perform a call transfer by selecting a transfer mode during a call.