Setting A Retrieve Key; Retrieving A Parked Call Using A Retrieve Key; Busy Lamp Field (Blf) - Yealink SIP-T29G User Manual

1. During a call, press the Call Park key.
The call is parked to the desired extension or the shared parking lot directly.
Related Topic
Setting a Park Key

Setting a Retrieve Key

You can set a line key as a Retrieve key, and specify a parked extension or retrieve lot you want to retrieve a parked call
from for this key.
Before You Begin
Check with your system administrator if the FAC or Transfer mode is set on your phone. Check with your system admin-
istrator if Account ID it is necessary for this key.
Procedure
1. Navigate to Menu->Features->Dsskey.
2. Select the desired line key.
3. Select Retrieve Park from the Type field.
4. (Optional.) Select the desired line from the Account ID field.
5. Do one of the following:
(Optional.) Enter the string that will display on the phone screen in the Label field.
l
Enter the parked extension or the retrieve lot in the Value field.
For theSIP-T29G IP phones, highlight the Label or Value field. Press Directory (Dir) and then select the desired
l
contact from the Directory list(s).
6. Press Save.
Tip
By default, you can long press the desired line key to set it. But your system administrator can configure the phone to enter
the Add Contact screen by long pressing the line key.

Retrieving a Parked Call using a Retrieve Key

Before You Begin
1. There is a call parked on the extension or the shared parking lot.
2. You need to set a Retrieve key with a parked extension or a retrieve lot.
Procedure
1. Press the Retrieve key when the phone is idle.
The call is retrieved from the parked extension or shared parking lot directly.
Related Topic
Setting a Retrieve Key

Busy Lamp Field (BLF)

The Busy Lamp Field (BLF) feature enables you to monitor a specific remote line for status changes on the phone. It is
not available on the SIP-T19(P) E2 IP phone.
Advanced Features
97