Placing An Intercom Call; Setting An Intercom Key; Placing An Intercom Call To The Target Extension - Yealink SIP-T48S User Manual

Yealink T4 Series IP Phones User Guide
Picking Up an Incoming Call of the Target Extension
Answering an Intercom Call

Placing an Intercom Call

To use the intercom feature, you should set a line key as an Intercom key in advance.
Topics

Setting an Intercom Key

Placing an Intercom Call to the Target Extension

Setting an Intercom Key
Procedure
1. Navigate to Menu->Features->DSS Keys.
2. Select a desired line key.
3. Select Intercom from the Type field.
4. Select the desired line from the Account ID field.
5. Do one of the following:
(Optional.) Enter the string that will display on the LCD screen in the Label field.
l
Enter the target extension number in the Value field.
For theSIP-T46S/T46G IP phone, highlight the Label or Value field. Press Directory (Dir) and then select a desired
l
contact from the Directory list(s).
For the SIP-T48S/T48G IP phone, tap
6. Press Save.
Tip
By default, you can long press a desired line key to set it. But your system administrator can configure the phone to enter
the Add Contact screen by long pressing the line key.
Placing an Intercom Call to the Target Extension
You can place an intercom call when the phone is idle or during a call. The target phone plays a warning tone and auto-
matically answers the call in speakerphone (hands-free) mode by default.
When the target phone has an active call, the intercom call is answered automatically after the active call ends.
Before You Begin
You need to set an Intercom key in advance.
Procedure
1. Press the intercom key.
2. To end the intercom call, press the intercom key again or End Call (EndCall).
Tip
You can also press the BLF/BLF List key to initiate an outgoing intercom call to the monitored user. Check with your system
administrator to find out if it is available on your phone.
Related Topics
Setting an Intercom Key
124
, and then tap the desired contact.