Yealink T2 Series IP Phones User Guide
Procedure
1. Navigate to Menu->Features->Dsskey, and then select the desired line key.
2. Select Key Event from the Type field.
3. Select Transfer (Trans) from the Key Type field.
4. Do one of the following:
(Optional.) Enter the string that will display on the phone screen in the Label field.
l
Enter the contact number you want to transfer the call to in the Value field.
For theSIP-T29G IP phones, highlight the Label or Value field. Press Directory (Dir) and then select the desired
l
contact from the Directory list(s).
5. Press Save.
Tip
By default, you can long press the desired line key to set it. But your system administrator can configure the phone to enter
the Add Contact screen by long pressing the line key.
Performing a Blind Transfer Using a Transfer Key
Before You Begin
You need to set a Transfer key with a specific contact. If you are using the SIP-T19(P) E2 IP phones, check with your sys-
tem administrator if the Transfer key has set for your phone. By default, your system administrator has set your phone
to perform blind transfer by Transfer key.
Procedure
1. Press the Transfer key during a call.
The call is transferred to the specific contact directly.
Related Topic
Setting a Transfer Key
Performing a Semi-Attended/Attended Using a Transfer Key
Before You Begin
You need to set a Transfer key with a specific contact. If you are using the SIP-T19(P) E2 IP phones, check with your sys-
tem administrator if the Transfer key has set for your phone. Your system administrator has set your phone to perform
attended transfer by Transfer key.
Procedure
1. Press the Transfer key during a call.
The phone calls the specific contact first. Wait until you hear the ringback tone or until the contact answers the
call.
2. Press the Transfer key again.
Related Topic
Setting a Transfer Key
76